MULTI 3400i MULTI-PARAMETERMETERS
Multi-parameter meter for monitoring pH, oxygen, andconductivity
FEATURES:
ÿ |
| On this page:
? Multi-parameterMeters Product Description |
Downloads (PDF):
? Multi-parameterMeters Brochure |
Multi-parameterMeters Product Description
The compact precision Multi 3400i Multi-parameterMeters enable you to carry out pH measurements, dissolved oxygen (DO)measurements and conductivity measurements quickly and reliably.ÿ The Multi3400i Multi-parameter Meters provide the maximum degree of operating comfort,reliability and measuring certainty for all applications.ÿ Themulti-parameter meter is hose-proof with battery or optional AC adapter and isoptimally suited for use in the field, in laboratories, or at production sites.
The Multi 3400i Multi-parameter Meters haveseveral useful features including an energy saving feature to avoid unnecessarybattery depletion.ÿ The energy saving feature switches the multi-parametermeter off if no key has been pressed for an hour.ÿ The multi-parametermeter can perform pH measurements with or without a temperature sensor or byusing the conductivity or oxygen probe’s built in temperature sensor.ÿ Themulti-parameter meters recognize which sensors are connected and automaticallyswitch to the correct mode for the temperature measurement.ÿ Themulti-parameter meter’s AutoRead function (drift control) checks the stabilityof the measurement signal.
pH/Oxi or pH/Cond Multi-parameter Meters
WTW multi-parameter meters stand for precise multi-parameter measuringtechnology.ÿ The pH/Oxi 3400i multi-parameter meter for the determinationof pH, oxygen and temperature and the pH/Cond 3400i multi-parameter meter forthe determination of pH, conductivity and temperature are favorably-pricedalternatives to the single parameter instruments for applications which requirethe measurement of several parameters.ÿ The multi-parameter meters arehose-proof and also meet the requirements of IP 66.ÿ Kits include aprofessional case with sample beakers, multi-parameter meter, pH electrode andoxygen or conductivity sensor, STH 320 stand and calibration and maintenancesupplies.
TetraCon?325 Conductivity Probe
The TetraCon? 4-electrode system sets a new standard for professionalconductivity measurements.ÿ In comparison with conventional measuring cellswith 2 electrodes, the TetraCon? 325 conductivity cell offers numeroustechnical advantages:
- Highly accurate and linear because of optimized cell geometry
- Extremely large measuring range with just one cell
- Long-term cell constant stability with high-quality abrasion-resistant graphite electrodes
- Built-in temperature sensor as standard
- Smallest immersion depth possible
- Automatic resistance compensation provides accurate measurements even with a dirty electrode
- Measurement not affected by cable influences, polarization effects or contact with side walls
- Robust, unbreakable epoxy body
Multi-parameterMeters Specifications
ÿ
| ÿ | pH/ORPmeasurement | Oxygenmeasurement | Conductivitymeasurement |
| RANGE/RESOLUTION | pH: ÿÿÿÿÿ-2.00 to 19.99 / 0.01 mV: ÿÿÿÿÿ-1999 to +1999 / 1 Temp.: ÿÿÿÿÿ23 to 221 øF (-5.0 to 105.0 øC) / 0.1(0.1) |
O2Concentration: ÿÿÿÿÿ0.00 to 19.99 mg/l / 0.01 ÿÿÿÿÿ0.0 to 90.0 mg/l / 0.1 O2 Saturation: ÿÿÿÿÿ0.00 to 199.9% / 0.1 ÿÿÿÿÿ0.0 to 600% / 1 Temp: ÿÿÿÿÿ32 to 122 øF (0.0 to 50.0 øC) / 0.1(0.1) |
Conductivity: ÿÿÿÿÿ0 to 1999 uS/cm / 1 ÿÿÿÿÿ0.00 to 19.99 mS/cm / 0.01 ÿÿÿÿÿ0.0 to 199.9 mS/cm / 0.1 ÿÿÿÿÿ0 to 500 mS/cm / 1 Salinity: ÿÿÿÿÿ0.0 to 70.0 according to the IOT table /0.1 Temp: ÿÿÿÿÿ23 to 221 øF (-5.0 to 105.0 øC) / 0.1(0.1) |
| PRECISION(+ 1 DIGIT) | pH: ÿÿÿÿÿ+ 0.03 (+2 pH units aroundthe calibration point) mV: ÿÿÿÿÿ+ 1 Temp: ÿÿÿÿÿ+ 0.1 |
O2Concentration: ÿÿÿÿÿ+ 0.5 % of measured value atambient temperature +41 to +86 øF (+5 to +30 øC) O2 Saturation: ÿÿÿÿÿ+ 0.5 % of measured value whenmeasuring in the range of + 10 K around the calibrationtemperature Temperature Compensation: ÿÿÿÿÿ<2% at +32 to +104 øF (+0 to +40 øC) Temp øC: ÿÿÿÿÿ+ 0.1 |
Conductivity: ÿÿÿÿÿ+ 0.5 % of value Salinity: ÿÿÿÿÿ+ 0.1 from +41 to +77 øF (+5 to+25 øC) ÿÿÿÿÿ+ 0.2 from +77 to +86 øF (+25 to+30 øC) Temp: ÿÿÿÿÿ+ 0.1 |
| TEMPERATURECOMPENSATION | Automatic: ÿÿÿÿÿ23 to 221 øF (-5 to +105 øC) Manual: ÿÿÿÿÿ-4 to 266 øF (-20 to +130 øC) |
32 to 122øF(0 to +40 øC) <2% from 32 to 104 øF (0 to +40 øC) |
Non-linearfunction for ultrapure and natural waters to EN 27 888 |
| REFERENCETEMPERATURE | N/A | N/A | 68 øF/77 øF(20 øC/25 øC) selectable |
Memory: 500Datasets
Serial Interface:
ÿÿÿÿÿBaud Rate: Adjustable: 1200, 2400, 4800,9600 Baud
ÿÿÿÿÿType: RS232, data output
ÿÿÿÿÿData Bits: 8
ÿÿÿÿÿStop Bits: 2
ÿÿÿÿÿParity: None
ÿÿÿÿÿHandshake: RTS/CTS + Xon/Xoff
ÿÿÿÿÿCable Length: Max. 15m
Ambient Conditions:
ÿÿÿÿÿStorage: -13 to +149 øF (-25 to +65 øC)
ÿÿÿÿÿOperation: 14 to 131 øF (-10 to +55 øC)
ÿÿÿÿÿClimatic Class: 2
Power:
ÿÿÿÿÿBatteries: 4 x 1.5 V alkali-manganese, typeAA
ÿÿÿÿÿOperational Life: approx. 3000 operatinghours
ÿÿÿÿÿPlug-in Power Supply:
ÿÿÿÿÿÿÿÿÿÿInput: 100 to 240 V~ / 50 to 60 Hz / 400 mA
ÿÿÿÿÿÿÿÿÿÿOutput: 9 V = / 1.5A
IP Rating: IP-66
Certifications: cETLus, CE
Electrical Safety: Protective class III
Weight: 0.7 lbs (0.3 kg) (without plug-in power supply)
Size: 6.8×3.1×1.5 in (172 x 80 x 37 mm)
ÿ
CellOx?325 Probe
Electrode material: Gold (Working), Lead (Counter)
Shaft material: POM
Measuring range: 0 to 50 mg/l O2, 0 to 600% O2
Temperature range: 32 to 122 øF (0 to 50 øC)
Min/max immersion depth: 2.4in to 65ft (6cm to 20m) depending on cablelength
Shaft length: 7.38 in (187.5 mm)
Diameter: 0.70 in (17.5 mm)
Weight: 6 oz (170 g)
TetraCon?325 Probe
Electrode material: Graphite
Shaft material: Epoxy
Shaft length: 4.72 in (120 mm)
Cell constant: K = 0.475 cm-1
Diameter: 0.60 in (15.3 mm)
Measuring range: 1 uS/cm to 2 S/cm
Temperature range: 32 to 212 øF (0 to 100 øC)
Min/max immersion depth: 1.4/4.7 in (36/120mm)
ÿ
| Multi 3400i Kit Multi-parameterMeter (PN 2F30-104B22) Includes Multi 3400i, SenTix? 41-3 pH electrode, CellOx 325-3 oxygenelectrode, TetraCon 325-3 conductivity sensor, Tech. buffers 4 and 7, 3M KCl, cleaning solution, 3 exch. membr. heads, electrolyte, abrasivefoil, cond standard (1413 æS/cm)ÿ All sensors have 9.8 ft (3 m) ofcable. |
| pH/Cond 3400i Set Multi-parameterMeter (PN 2E30-101B02) Includes pH/Cond 3400i, SenTix? 41-3 pH electrode, TetraCon 325-3conductivity sensor, beaker, cond standard (1413 æS/cm)ÿ Allsensors have 9.8 ft (3 m) of cable. |
| pH/Oxi 3400i Set Multi-parameterMeter (PN 2D30-101B20) Includes pH/Oxi 3400i, SenTix? 41-3 pH electrode, CellOx 325-3 oxygensensor, 3 exchange membrane heads, cleaning solution, abrasive foil,technical buffers 4 and 7, 3 M KClÿ All sensors have 9.8 ft (3 m)of cable. |
