Microtitre plate shakers – SSM5, SSL5
High-speed vibrational mixing action – ideal formicrotitre plates
Digital selection of speed
Personal sized SSM5 for mixing 4 plates simultaneously
Laboratory size SSL5 for mixing 8 plates simultaneously
Built-in digital timer or continuous operation
Accessories available for the mixing of microcentrifuge tubes
The SS:5 series of high-speed microtitre plate shaker are designed for themixing of microtitre plates and microcentrifuge tubes. High speed combinedwith a tiny orbit creates a vigorous shaking action required for mixing smallvolumes contained within well plates and microcentrifuge tubes. Supplied witha highly effective non-slip mat, the mat will securely hold in place up tofour microtitre plates.
Speed is variable from 250 to 1,250 rpm and is easily set via the digitaldisplay in 10rpm increments. The built-in digital timer can be either set from1 second to 90 minutes, 1 minute to 9 hours or in minutes only mode up to 9999minutes for maximum versatility. The units can also be set for continuousoperation.
A choice of three accessory tube holders is available, designed to accommodate1.5ml, 0.5ml and 0.2ml microcentrifuge tubes. Two tube holders can be used atany one time and are securely held in place by the non slip mat, turning theunit into an effective microtube mixer.
For samples requiring controlled temperature and/or humidity conditions, theSSM5 small footprint is ideal for placement inside CO2 incubators.
| SSM5 | SSL5 | |
|---|---|---|
| Platform dimensions (w x l) | 220 x 220mm | 306 x 306mm |
| Number of plate positions | 4 | 8 |
| Speed range | 250 – 1250rpm | 250 – 1250rpm |
| Orbit diameter | 1.5mm | 1.5mm |
| Maximum load | 1Kg | 2Kg |
| Operational temperature | +4 to +40¡C | +4 to +40¡C |
| Maximum permissiblehumidity | 80% | 80% |
| Overall dimensions (w x d xh) | 240 x 300 x 160mm | 360 x 420 x 160mm |
| Electrical supply | 230V, 50Hz, 50W | 230V, 50Hz, 50W |
Ê
Ê
Ê
Ê
Ê
| Model | Description |
|---|---|
| SSM5 | Shaker, microtitre, mini |
| SSL5 | Shaker, microtitre, labscale |
| SSM5/1 | Tube holder for 1.5ml tubes |
| SSM5/2 | Tube holder for 0.5ml tubes |
| SSM5/3 | Tube holder for 0.2ml tubes |
