Home » Shop » Uncategorized » Digital Osilloscope

Digital Osilloscope

Original price was: $569.40.Current price is: $357.62.

Sale!

25 in stock

SKU: GDS-1102 Category:
Features
100/60/40/25 MHzBandwidth
2 Input Channels
250MSa/s Real-Time and 25GSa/s Equivalent-Time Sampling
4k Memory Length per Channel
Peak Detect as Fast as 10ns
Save/Recall of 15 Front Panel Settings & Waveforms
5.6″ TFT Color Display
19 Auto Measurements
Arithmetic Operators – Add, Subtract, FFT
Timebase Range: 1nS ~ 10nS/div
USB Port for PC Connection
6-Digit Real-Time Frequency Counter
SD Card Supported
GDS-1022 GDS-1042 GDS-1062 GDS-1102
VERTICAL
Channels 2 2 2 2
Bandwidth DC ~ 25MHz (-3dB) DC ~ 40MHz (-3dB) DC ~ 60MHz (-3dB) DC ~ 100MHz (-3dB)
RiseTime <14ns Approx. <8.7ns Approx. <5.8ns Approx. <3.5ns Approx.
Sensitivity 2mV/div ~ 5V/div(1-2-5 increments)
Accuracy ±(3% x|Readout|+0.1 div + 1mV)
Input Coupling AC, DC &Ground
Input Impedance 1M±2%, ~16pF
Polarity Normal &Invert
Maximum Input 300V (DC+ACpeak), CATII
Waveform SignalProcess + , – , FFT
Offset Range
 
2mV/div ~50mV/div : ±0.4V
100mV/div ~ 500mV/div : ±4V
1V/div ~ 5V/div : ±40V
Bandwidth Limit 20MHz (-3dB)
TRIGGER
Sources CH1 , CH2 , Line, EXT
Modes Auto, Normal,Single, TV, Edge, Pulse Width
Coupling AC , DC , LF rej., HF rej. , Noise rej.
Sensitivity DC ~ 25MHz :Approx. 0.5div or 5mV
25MHz ~ 100MHz: Approx. 1.5div or 15mV
EXTTRIGGER
Range ±15V
Sensitivity DC ~ 30MHz : ~50mV ; 30M ~ 60MHz : ~100mV
Input Impedance 1MΩ±2% , ~16pF
Maximum Input 300V (DC AC peak), CATII
HORIZONTAL
Range 1ns/div ~ 10s/div(1-2-5 increments); ROLL : 250ms/div ~ 10s/div
Modes Main, Window,Window Zoom, Roll, X-Y
Accuracy ±0.01%
Pre-Trigger 10 div maximum
Post-Trigger 1000 div
X-YMODE
X-AxisInput Channel 1
Y-Axis Input Channel 2
Phase Shift ±3° at 100kHz
SIGNALACQUISITION
Real-TimeSample Rate 250MSa/s maximum
EquivalentSample Rate 25GSa/s maximum
VerticalResolution 8 Bits
RecordLength 4K Dots maximum
Acquisition Mode Normal, PeakDetect, Average
Peak Detection 10ns (500ns/div ~10s/div)
Average 2 , 4 , 8 , 16 ,32 , 64 , 128 , 256
CURSORSAND MEASUREMENT
VoltageMeasurement Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/Overshoot , FallPreshoot/Overshoot
Time Measurement Freq , Period ,Rise Time , Fall Time , Positive Width , Negative Width , Duty Cycle
CursorsMeasurement Voltagedifference between cursors (ΔV)
Time difference between cursors (ΔT)
Auto Counter
 

Resolution : 6 digits
Accuracy : ±2%
Signal Source: All available trigger source except the Video trigger mode

CONTROLPANEL FUNCTION
Autoset Automaticallyadjusts Vertical VOLTS/DIV, Horizontal TIME/DIV, and Trigger level
Save Setup Up to 15 sets ofmeasurement conditions
Save Waveform 15 sets ofwaveform
DISPLAY
TFT LCD Type 5.6 inch
DisplayResolution 234 (Vertically)x 320 (Horizontally) Dots
DisplayGraticule 8 x 10 divisions
DisplayBrightness Adjustable
INTERFACE
USB SlaveConnector USB1.1 & 2.0full speed compatible (printers and flash disk not supported)
SD Card Slot Image (BMP),waveform data (CSV), and setup (SET)
POWERSOURCE
Line VoltageRange AC 100V ~ 240V ,48Hz ~ 63Hz , Auto selection
MISCELLANEOUS
Multi-LanguageMenu Available
Online Help Available
DIMENSIONS& WEIGHT  
  310(W) x 142(H) x140(D)mm; Approx. 2.5kg